
Tisas 1911 Optic Cut Carry Slide Assembly, Black, 9MM
Tisas USATisas 1911 Carry Optics Ready slide assembly for 9MM frames. Includes sights, firing pin/spring/stop and extractor. Black cerakote finish.
Optics Mounting Info:
- Direct Mount for Holosun 507k & RMSc Footprint Optics
- Factory Sights Lower 1/3 Cowitness with most optics
- Optic Mount Thread Pattern: M3 x 0.5
- Torque Specs
- Minimum 10.2 in-lb
- Max 11.9 in-lb
- Blue Thread Lock or Equivalent w/ breakaway rating of 71 in-lb
OEM replacement for our 1911 Carry and 1911 Carry Double Stack model pistols in 9MM.
- Caliber:
- 9MM
- Material:
- Carbon Steel
- Sights:
- Novak Style Cuts
- Fitment:
- 1911 Series 70 Frames
- Finish:
- Matte Black Cerakote
For more information go to : www.P65Warnings.ca.gov
Reviews
-
1911 Optic cut slide 9mm
Bought the 1911 optics cut carry slide for my Stingray. I was consistently low and left with the iron sites that were on the original slide. Lots of advice received about trigger pull for righties, etc. Nothing worked. The OC slide fit perfectly. Liked the iron sites on the OC slide better than the original, but still low/left (~2" @ 10 yards). Had the iron sites adjusted on both by a gunsmith. At least centered now. Fitted a 507k x2 which fit perfectly but elevation remained too high and couldn't adjust any further without a shim. Traded for a Vortex defender CCW 3 MOA which also fit perfectly without shim or plate. Bore sited optic and iron sites (both). Rear site off on iron sites but elevation still on. Defender held zero and carved out the red center at 10 yds. Had considered trading it all for a Shadow 2 due to centering issues. Glad I held out for the smith and optic and saved some money. Now will be working on my technique, speed and accuracy. May tweak a bit later with an EGW bushing and a tuned trigger, but not yet.
-
1911 Optic Cut Slide 9mm
I like the slide but the Holosun 507k is too long and would require filing to at the lower front part of the optic or slide. I pulled a Shield SMS2 optic off another pistol and it fits fine as it has a flat from base.
-
tisas 1911 9mm optic cut carry slide assembly
This slide is what i have been wanting . It works and does a very good job.
-
Optic Cut Carry Slide
I put this slide on my 9mm Stingray, and it works great, shoots great (with the Holosun 507K), and it works well on my 9mm Tank Commander, equally well. I am very happy with it. I have the B9R DS pistol, also, with the same slide, it was the impetus for buying the slide for the Stingray. It's almost like cheating.